2.5L-5L Bottle Blowing Machine PET Bottle

Semi auto PET bottle blowing machine for 5L include assistant machines and mould Descriptions:KM-9B semi automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 5000-10000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.● Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.● The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.● The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.● The machine can be operated in the step-by-step mode and the semi- auto mode.● The machine is small with low investment, easy and safe to operate by one person.Technique Parameter of blow molding machine:ModelKM-9BContainerProduct materialPETVolume5L-10LTheoretical output300-500PCS/H for 5LPreform length15mm-460mmPreform inner diameterΦ15mm-200mmMouldingMax.mould plate Dimenstion(L x W)470x500mmMax.mould thickness370mmClamping force100KNMould opening stroke350mmMachine size and weightMain machine (L x W x H)193*72*4575pxMain machine weight800KgHeater (L x W x H)187*63*3625pxHeater weight250KgPower17.5kwFunctions of auxiliary equipments: (1) Air compressor is the air source for PET stretch blow molding machine, carrying out the process of compressing air from atmosphere to the required pressure.(2) Air dryer is to remove the moisture from the compressed air and lower temperature of the compressed air in the heat exchanger.(3) Air filter is to clear up the impurities out of the compressed air, like carbon-hydrogen, tiny dust and solid particles.(4) Air tank is to receive and supply air for the machine as storage.HP air compressor： Air compressorUnit1.58M3/min 30KGVolumeM31.58PressureKg30Speedr/min850PowerKW18.5Overall Dimensionmm1100*1100*1850Weightkg650Air Cooling Drier： Refrigeration Air DryerUnit2.0M3/min 3.0MpaFlow capacityNm3/min2.0W.PMpa3.0Inlet Temp.℃≤80Dew point℃23Ambient Temp.℃≤38Power supplyV/HZ220/50Compressor powerKw0.75Cold Mediummm(1050×650×1100)WeightKg120Air Filter：Refining-FilterUnit2.0M3/min 30KgFlow CapacityM3/Min2Max. work pressureMpa3.0Inlet Temp.℃≤50Cold Mediummm750*350*350WeightKg20◆ Remarks: Delivery: 35 daysPayment term :30%T/T in advance, and the balance be paid before shipment◆  Guarantee:One year after the buyer’s receipt of the machines: If there were any problem happens, after checking the photos or videos from the customers, spare parts are going to be offer free of charge to fix any problem happen immediately within this one year.◆  Training and Service:1. Installation instruction at scene if the buyer requires.2. Testing at scene if the buyer requires.3. Training of the operation and maintenance if the buyer requires.4. Free maintenance for the equipment problem caused by equipment design and quality.5. technical consultant and service all the life time of the equipment◆ Installation and Testing:The buyer’s required to install the machines according to the instruction of our technical data; our factory will send engineer to guide the equipment installation and testing until the normal operation. The buyer’s required to sign a test report for us. And should be responsible for the engineer's go and back ticket, accommodation and dinner, and pay usd100 for each person per day.  url:http://www.rendamachinery.com